International. Interseal HS – Temperate – North, South and East Europe. Primers / Tie Coats – Epoxy Primer. Find out more. Speak with one of our experts to. Interseal HS is certified to ANSI/NSF standard As a high build epoxy it is suitable for a variety of new construction applications including immersion. INTERSEAL HS – ALUMINIUM – L (). Product Code:INTHS- EGAGL. Product Description: A low VOC, two component high build, high.
|Published (Last):||1 May 2007|
|PDF File Size:||12.84 Mb|
|ePub File Size:||18.13 Mb|
|Price:||Free* [*Free Regsitration Required]|
Further information is available from International Protective Coatings.
International Interseal HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. Where a cosmetically acceptable topcoat is required the following products are recommended:. Interseal HS can be used as a non-skid deck system by modification with addition of GMA crushed flint aggregate.
INTERSEAL HS – LIGHT COLOR – 16,09L (L + COLORATION) ( :1)
Once the unit has been mixed it must be used within the working pot life specified. The minimum purchase order quantity for the product is 1. Provides excellent anti-corrosive protection in industrial, interweal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.
Always mix a complete unit in the proportions supplied. Do not thin more than allowed by local environmental legislation. If salt water is used in the wet blast process the resulting surface must be thoroughly washed with fresh water before application of Interseal HS.
Each product clause is authored in NBS format and is intended for inclusion in project specifications. Avoid using a mixture of application methods whenever possible.
Certification is for tanks greater than gallons Mouse over image to zoom. Application should then be to a suitably primed surface.
This product is no longer in stock.
Aged Coatings Interseal HS is suitable for overcoating a limited range of intact, tightly adherent aged coatings. Low or high temperatures may require specific application techniques to achieve maximum film build. Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service. The content of this website is our best recommendation and is not advice.
Be the first to write a review for this product! Premature exposure to ponding water will cause a color change, especially in dark colors.
Application should then be to a suitably niterseal surface.
Your browser does not support automatic copy to clipboard. Warning Intersexl order to achieve optimum performance on hand prepared steel, the aluminum pigmented version should be applied as a primer coat by brush to ensure thorough wetting out of the substrate by Interseal HS. However, it can be used over suitably primed surfaces. Premature exposure to ponding water will cause a color change, especially in dark colors.
Alternatively, a broadcast intersal of application can be used. Alternatively, a broadcast method of application can be used.
Brush Typically mils microns can be achieved Roller Typically mils microns can be achieved How to use Mixing Material is supplied in two containers as a unit.
Sagola or Air texture gun fitted with a mm nozzle. Surface preparation The performance of this product will depend upon the degree of surface preparation.
INTERSEAL 670HS – PART B (FAST) – 0.57L (5.63 :1)
The surface to be coated should be clean, dry and free from contamination. Dry bristle brushing will normally be adequate for accumulated dirt. Interseal HS can be used as a non-skid deck system by modification with addition of GMA crushed flint aggregate. Varnish Water base Hybrid. Warning In order to achieve optimum performance on hand prepared steel, the aluminum pigmented version should be applied as a primer coat by brush to ensure thorough wetting out of the substrate by Interseal HS.
However, these phenomena are not detrimental to anti-corrosive performance.
However, this product is not recommended where thermoplastic coatings such as chlorinated rubbers and vinyls have previously been used. Low trade prices Our best trade prices on everything! Preferred application is by a suitable large tip hopper gun e. Consult International Protective Coatings. Loose or flaking coatings should be removed back to a firm edge.